Replacement ECU Boards.

 

Mitsubishi - Subaru - Honda.

Autronic has produced replacement ECU boards for the original ECU on Mitsubishi EVO 4,5,6,7 and 8. Subaru WRX 1995-96, 1997-98 and 1999-00. Honda Civc/Integra 1992-95 (OBD1) and also 1996-00 OBD2 cars when used with the supplied adapter harness.

The original motherboard and connector are removed from the ECU case, and the Autronic motherboard and connector, clips or screws into the case. The original harness plugs in and the job is done, no wiring and all original sensors are used.


Considerable gains in power across the complete RPM range can be achieved with these boards.

Both road car and Group N rally car versions available. External view of ECU case and connector is unchanged from its stock appearance.

Allows full control over fuel, ignition timing, boost pressure and all other engine functions. All boards have Anti-lag and Autotune.

Base programs are available. Some final tuning will be required.



Note: Click on image for a larger view.

 
Mitsubishi Lancer EVO 4 replacement board.
Mitsubishi Eclipse 2G DSM replacement board.
Mitsubishi Lancer EVO 5 replacement board.
Mitsubishi Lancer EVO 5, 6 and 7 replacement board.
Mitsubishi Lancer EVO 8 replacement board.
This ecu is not suitable for E8 JDM (Japanese domestic market)
Subaru WRX 1995 to 1996 replacement board.
Subaru WRX 1997 to 1998 replacement board.
Subaru WRX 1999 to 2000 replacement board.

Honda Civic/Integra 92-95 (OBD1) can be used on 1996-00 (OBD2) cars with supplied adapter harness.

 

Copyright 2002 Ray Hall Turbos. Autronic